FLUKE 87 III CALIBRATION and FLUKE 87 III REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 87 III Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 87 III (87III)   Description / Specification:    
FLUKE 87 III Handheld True RMS Digital Multimeter

The Fluke 87 III 4000-count DMM provides 11 functions for electronic and industrial applications, including high performance dc/ac voltage and current measurement, frequency, duty cycle, resistance, conductance, and capacitance measurement. It is EMI shielded and comes with a splash-proof and dust-proof case. A protective holster enables safe use under harsh operating conditions. Features. Min/Max/Average recording mode with Min/Max AlertTM; stores the highest, lowest and 36-hour average of all readings, allowing signal monitoring for seconds or days. Min/Max Alert gives an audible tone for readings above or below previous minimums or maximums. Frequency, duty cycle and capacitance measurements. 1000V rms input protection; Input Alert provides an audible warning if the test leads are in current, but the function switch is not. This reduces the risk of damage to the equipment being tested and to the meter. Provides 1000 volt rms input protection in both ohms and diode test. 3%-digit, 4000 count display updates 4 times per second, analog display updates 40 times per second. 4.5-digit mode, 19 999 counts and True-rms ac voltage and current. Ranges. VDC: 400 mV - 1000V. VAC (1 kHz to 2.5 kHz.): 400 mV - 1000V. mADC: 40.00 mA - 10.00 A. mAAC (45 Hz to 2 kHz): 40.00 mA - 10.00 A. µADC: 400.0 µA - 4000 µA. µAAC (45 Hz to 2 kHz): 400.0 µA - 4000 µA. Resistance: 400 ohm - 40 M-ohm. Conductance: 40 nS. Capacitance: 5.00 nF- 5.00 uF. Frequency (0.5 Hz to 200 kHz, pulse width >2 µs): 199.99 Hz -199.99 kHz.



 

Standard Calibration $70.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 87 III. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Load Regulation
Load regulation is the capability to maintain a constant voltage (or current) level on the output channel of a power supply despite changes in the supply's load (such as a change in resistance value connected across the supply output).

Power Linearity
When changing the power level and measuring the differences (in dB) between actual and displayed power levels, the power linearity is ± half the span (in dB) between the maximum and the minimum value of all differences.

Settling Time
Settling time of an output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band, usually symmetrical about the final value.

Please contact us for your FLUKE 87 III CALIBRATION and/or FLUKE 87 III Handheld True RMS Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: